|
|
Post by ppainej on Nov 12, 2003 11:13:02 GMT -5
Anyone local got a front bumper cover for a 2nd gen 3000gt, 1994-1996, in reasonable condition? Cosmetic perfection not required but solid without cracks.
Correction: I need the exterior molded plastic face for the front bumper - forward from the hood, wheelwell to wheelwell.
|
|
|
|
Post by Iceman on Nov 12, 2003 11:42:26 GMT -5
You mean like a "bra"?
If so, you need to read the fine print, they all tell you to remove in the rain so they don't abraid the paint under the edges.
If you are looking at doing it because of snow, I can't help but think the trapped road salt between the bra and the paint would be even worse than just water.
just my .02
|
|
|
|
Post by ppainej on Nov 12, 2003 14:55:13 GMT -5
erp. Nope. I guess I used the wrong term - Actually looking for the bumper 'face' as CAPS calls it - the exterior plastic covering of the bumper assembly. I guess it could be called the 'bumper' but CAPS uses that term for the entire assembly including the internal supports and stuff. |
|
